Parameter: |
Description: |
/autostart | Starts PENM network installation automatically without asking to start. |
/debug | Logs PENM using/activities in %TEMP%\PENMDebug.txt. |
/focusno | Set the input focus to the 'No' button for the PENM network startup dialog. |
/forceservices |
Install network components/services even if no network card was found. |
/guidisable=mask | Don't show the specified tabs, this can be a combination of the following values: 1 - Computer, 2 - Sharing, 4 - Drives, 8 - Profiles, 16 - Other, 32 - WiFi, 64 - Advanced 128 - WiFi prefered, 256 - WiFi service, 512 - Size button Sample: 16 + 32 -> Hide 'Other' (16) and 'WiFi' (32) -> 48 Notice: The "Config"/"IP-Settings" and "About" tabs are always shown. If the "WiFi" tab is enabled then the "Available networks" tab is always shown. |
/ini=ini file |
Load the specified ini file insted of 'PENetwork.ini'. |
/noprofileselect | Disable the default showing of the profile selectin GUI on first PENM startup. |
/profile=name |
Load the specified profile directly from ini file (see '/ini='). |
/profileeditor | Starts directly the PENM configuration/profile editor. |
/shareall | Share all local drives automatically if sharing was installed and
started (usable with /startsharing). |
/smalltab | Starts PENM with small left tabs. |
/startsharing | Install and start sharing automatically after network installing. |
/topmost |
Set the PENM network install window to topmost window on desktop. |
/useprofiles | Read profiles from ini file. |
/wifiexporter | Starts directly a small WiFi export GUI to export local WiFi profiles to XML files. |
Mainkey: |
Used: |
Value: |
Description: |
HKLM |
Only 1st startup |
AutoStart |
Starts PENM network installation automatically without asking to start. |
HKLM |
Only 1st startup | CloseAfterStartnet |
After network installing the PENM GUI is NOT shown. |
HKLM |
Always |
CloseToTray |
Closing the PENM window 'moves' it to systray. |
HKCU
(HKLM)
|
Always | Debug |
Logs PENM using/activities in %TEMP%\PENMDebug.txt. |
HKLM |
Only 1st startup | EnableAutoIP |
Enable the APIPA using, default this mode is set to off. |
HKLM | Only 1st startup | FocusNo |
Set the input focus to the 'No' button for the PENM network startup dialog |
HKLM |
Only 1st startup |
ForceScanOnStartup |
Force device detection of network cards on 1st startup even network is already installed. |
HKLM |
Always | GUIDisable | Don't show the specified tabs (see ini options for more details). |
HKCU |
Always | MinimizeToTray |
Minimizing the PENM window 'moves' it to systray. |
HKLM |
Only 1st startup | ShareAll |
Share all local drives automatically if sharing was installed and started (usable with /startsharing). |
HKCU |
Always | ShowTrayActivity |
Show the network activity icon in systray. |
HKCU |
Always | SmallTab |
Starts PENM with small left tabs. |
HKLM |
Only 1st startup | StartCountdown |
The time in seconds for the startup GUI countdown. |
HKCU | Always | StartMode |
Optional set the PENM info window startup mode: 0 - Don't show, 1 - Center (default), 2 - TopLeft, 3 - TopRight, 4 - BottomLeft, 5 - BottomRight, 6 - Depends on systray position |
HKCU |
Always | StartToTray |
Always start PENM in systray (usefull together with "MinimizeToTray" and/or "CloseToTray") |
HKLM |
Only 1st startup | TopMost | Set the PENM network install window to topmost window on desktop. |
HKLM |
Only 1st startup | UseProfiles |
Read profiles from ini file. |
HKLM |
Only 1st startup | UseProfileSelect |
Show the profile selector GUI on first PENM startup (profiles has to exist in ini file). |
HKLM |
Only 1st startup | UseStartCountdown |
Use a countdown on 1st startup, only if AutoStart is '0' or not set. |
Value: |
Description: |
AutoStart |
Starts PENM network installation automatically without asking to start. |
EnableAutoIP |
Enable the APIPA using, default this mode is set to off. |
FocusNo |
Set the input focus to the 'No' button for the PENM network startup dialog |
ForceScanOnStartup |
Force device detection of network cards on 1st startup even network is already installed. |
GUIDisable | Don't show the specified tabs (see ini options for more details). |
MinimizeToTray |
Minimizing the PENM window 'moves' it to systray. |
ProfileDefault |
The default network profile to apply. |
ProfileCountdown |
The time in seconds for the profile selection GUI countdown. |
ShareAll |
Share all local drives automatically if sharing was installed and started (usable with /startsharing). |
ShowMain |
Shows the PENM main GUI after network installing ("Yes") or leave it ("No"). The default setting is "Yes" if not set. |
ShowTrayActivity |
Show the network activity icon in systray. |
StartCountdown |
The time in seconds for the startup GUI countdown. |
StartMode |
Optional set the PENM info window startup mode: 0 - Don't show, 1 - Center (default), 2 - TopLeft, 3 - TopRight, 4 - BottomLeft, 5 - BottomRight, 6 - Depends on systray position |
StartSharing |
Install and start sharing automatically after network installing. |
UseIniIcons |
Load other icons from ini file (please see sample ini file in zipped archive download) |
UseOsFont |
Use OS as GUI font or if set to 'No' select another font via 'GlobalFont=Comic Sans MS' ie. |
UseProfileCountdown |
Use a countdown for profile selection on 1st startup. |
UseProfiles |
Read profiles from ini file. |
UseProfileSelect |
Show profile selection GUI. |
UseStartCountdown |
Use a countdown on 1st startup, only if 'AutoStart' is 'No' or not set. |
TrayLimitHeight (new) |
Limit the height of the tray info window by default to 1/2 desktop, otherwise it is only limited by the height of the desktop (default "No"). |
TrayInfoHeight (new) |
Set specific height of the tray info window, only used if TrayLimitHeight is set to "Yes". |
TrayAdaptWiFi (new) |
Adapt the height of the tray WiFi window to the height of the tray info window (default "No"). |
TrayWiFiHeight (new) |
Set specific height of the tray WiFi window, only used if TrayAdaptWiFi is set to "No" or not set. |
TrayShowMAC (new) |
Show MAC addresses of network adapters in the tray info window (default "No"). |
TrayShowIPv6 (new) |
Show IPv6 addresses of network adapters in the tray info window (default "No"). |
IconLib |
Use specific icon library in a specific color scheme |